The Importance of Safety Features in Your New Walk-In Bathtub

January 10, 2024

As we age, mobility and flexibility tend to decline, making everyday tasks like bathing more challenging. For many seniors, getting in and out of a standard bathtub poses a safety risk that can lead to slips and falls. Walk-in tubs provide a safe bathing solution, allowing easy access and exit while seated. With the right safety features, they can help prevent injuries and give you peace of mind.

When shopping for a new walk-in tub, pay close attention to the safety features included. Not all models offer the same level of security and protection. Prioritize designs with low thresholds, grab bars, slip-resistant floors, fast-drain systems, and more. Read on as we explore some of the most important features to look for.

 

1. Low Entry Thresholds

A low threshold allows you to easily step into the tub without lifting your legs too high. Standard bathtub thresholds tend to be over a foot high —too challenging for those with mobility issues. Look for walk-in tubs with thresholds less than 3 inches high. This small lip minimizes the risk of tripping.

Some manufacturers offer threshold heights as low as 1 inch. This ultra-low design makes entry and exit seamless and safe. Just be sure to factor in the door size. Smaller doors mean lower thresholds.

 

2. Grab Bars

Once inside the tub, grab bars provide stability and support, allowing you to sit and stand safely. Most walk-in tubs have at least one bar installed, but two or more is ideal. Check for bars along the sidewalls and back wall. Stainless steel bars with slip-resistant grips supply sturdy anchoring points to grasp as you maneuver in the tub.

 

3. Seat Heights and Ergonomic Designs

Proper seat height and ergonomic tub shaping ensure bathing comfort and safety. Look for seat heights ranging between 16 and 18 inches. This allows easy sitting and standing without excessive bending or crouching. Seek tubs with ergonomic shapes that offer lumbar support and align with the natural contour of your back. This relieves pressure on joints and muscles, promoting relaxation.

 

4. Quick Drain Systems

Standard bathtubs can take several minutes to drain fully after a bath. Getting out beforehand means navigating slippery surfaces and puddles of residual water. Walk-in tubs solve this with fast drain systems that empty the tub in under 2 minutes. Quick drainage allows you to exit safely from a dry surface.

Some models boast drain speeds under 90 seconds. The fastest tubs utilize dual flush mechanisms that siphon out water rapidly from multiple points across the floor surface.

 

5. Slip-Resistant Surfaces

Wet surfaces amplify falling risks. Even with grab bars and low thresholds, slippery tub floors present a hazard. Seek out textured, slip-resistant flooring that maintains grip and traction throughout your bath, allowing stable footing when standing or sitting.

Many manufacturers install slip-resistant coatings or adhesive strips to tub floors. Others integrate grip patterns or textured surfaces into the acrylic or plastic flooring itself. These measures often carry extended warranties against wear, lasting for decades.

 

6. Safety Accessories

Beyond the basics, several beneficial accessories promote safety in your walk-in tub:

  • Wireless waterproof call buttons for summoning help if needed
  • Front access panels that allow emergency access from outside the tub
  • Built-in lighting for clear visibility entering and exiting, avoiding tripping hazards
  • GFCI-protected whirlpool circuits with automatic shutoffs to prevent shock or electrocution
  • Inline water purification to minimize chemical exposure from bath water
  • Ozone sanitation systems that prevent mold or bacteria growth

While pricier, these extras provide an added layer of protection and utility for daily use.

 

7. Other Key Factors

  • Multi-level seating – Some walk-in tub models allow you to adjust the height of the seat up or down, providing versatility for users of different heights.
  • Reinforced doors – Seek tub doors made from metal or reinforced polymer materials for maximum durability and sealing performance over years of use.
  • ADA compliance – Adherence to ADA guidelines indicates suitable sizing, hardware, and accessibility features tailored for those with mobility challenges or disabilities.
  • Warranties – Most manufacturers offer 5-10 year limited warranties covering leaks, defects, and finish flaws. Extended parts or labor coverage ensures long-term safety and performance with repairs covered.

The benefits of aging in place start with meeting daily needs safely and independently. Investing in a walk-in tub equipped with secure entry, supportive handholds, quick drainage, and other safety essentials helps cut falling risks while bathing. Protect your wellbeing for years to come with the right tub features tailored to your mobility needs. Reach out to manufacturers to learn more about maximizing safety, accessibility, and comfort in your new tub.

 

Additional Walk-In Tub Resources